Product Description
VW Scirocco Mk1 / Cabriolet Inner Window Scraper – Cut-to-Fit
Replacement inner roll-up window scraper / beltline weatherstrip for Volkswagen Scirocco Mk1 and Golf Mk1 Cabriolet / Rabbit Convertible models. This scraper installs along the inside lower edge of the roll-up window glass and wipes against the glass as the window is raised and lowered.
The scraper features an internal metal reinforcement to help maintain its shape and prevent warping. This reproduction is supplied long so it can be trimmed to the required length for its specific installation position.
On Scirocco Mk1 models, this scraper can be used on either the LH / driver or RH / passenger front roll-up window.
On Cabriolet / Rabbit Convertible models, this scraper can be used on either the LH or RH front door window. It can also be used on the rear roll-up quarter windows, but MUST be cut / trimmed to the shorter rear-window length during installation.
Original window scrapers commonly become hardened, cracked, shrunken, distorted, or separated from their reinforcement after decades of exposure to sunlight and weather. A deteriorated scraper can allow excessive water and debris into the window cavity and can contribute to rattles, wind noise, and poor contact with the glass.
Features:
-
Replacement inner window scraper / beltline weatherstrip
-
Fits Volkswagen Scirocco Mk1 and Golf Mk1 Cabriolet / Rabbit Convertible
-
Inner glass position
-
Fits LH or RH side
-
Internal metal reinforcement helps prevent warping
-
Supplied long for multiple applications
-
Fits Cabriolet front roll-up windows
-
Fits Cabriolet rear roll-up quarter windows when cut / trimmed to the required rear-window length
-
Wipes against the roll-up glass as the window is raised and lowered
-
Helps control water, dust, and debris entering the window cavity
-
Replaces hardened, cracked, distorted, shrunken, or missing original scrapers
-
Sold individually
OEM / OE Reference Number:
-
155 837 475 B — Inner Window Scraper / Beltline Weatherstrip Reference
Fitment:
-
1975-1981 Volkswagen Scirocco Mk1 — LH or RH front window
-
1974-1981 Volkswagen Scirocco Mk1 / Type 53 — applicable international models
-
1980-1984 Volkswagen Rabbit Convertible — front or rear roll-up windows
-
1985-1993 Volkswagen Cabriolet — front or rear roll-up windows
-
1979-1993 Volkswagen Golf Mk1 Cabriolet — applicable international models
Important: This is the INNER window scraper, which installs along the interior side of the roll-up glass.
The same reproduction scraper can be used on either the LH or RH side.
For Cabriolet / Rabbit Convertible rear roll-up quarter windows, the scraper is intentionally supplied longer than required and MUST be cut / trimmed to the correct rear-window length during installation. Test-fit and mark the scraper before cutting.
For the exterior side of the glass, use the corresponding Outer Window Scraper.
Quantity: 1 Inner Window Scraper
Quantity Required:
-
Scirocco Mk1 — 2 pieces for both front windows
-
Cabriolet / Rabbit Convertible front windows — 2 pieces
-
Cabriolet / Rabbit Convertible rear roll-up windows — 2 pieces, trimmed to length during installation
-
Cabriolet / Rabbit Convertible all four inner scraper positions — 4 pieces
